Beissbarth ML4000

Cableless alignment system with 8 toe sensors and wireless data transfer.

The world's first computer aligner with cordless infra-red CCD camera technology.  Cable less data transmission from sensor heads to console, and 8 toe sensors for wrap-around measurements make Beissbarth's ML4000 the #1 aligner worldwide.  Zero-run out, no-mar wheel clamps attach to all passenger and light truck wheels 10" to 20" in diameter regardless of configuration.  Minimum 2.1 GB hard drive, 686 high speed processor, 17" SVGA color monitor, printer, digitizer board, and a customer data base capable of storing well over 100,000 records are only a few of the standard features.  110v, 1ph, 60hz.

Features:

- Calibration factors constantly monitored by Beissbarth's "Quali-Check" calibration software
- CCD camera technology with cordless infra-red  data transmission
- Patented "Spoiler Program" automatically senses
- front spoilers or air dams allowing sensor to  'see' around obstruction
- Quickly identifies collision angles


Standard With...

 

Hardware:

- High speed 686 computer with a minimum of 2.1 GB hard drive, 8 meg of ram, 166 mhz, and 3.5" floppy drive, GB hard drive, 8 meg of ram, 166 mhz, and 3.5" floppy drive
- 17" SVGA color monitor
- Uninterrupted Power Supply (UPS) surge protector
- Dot matrix printer
- Digitizer data entry board
- Full-function 102 key keyboard with protective membrane
- Multi-function infra-red remote control

Software:

- Beissbarth's ML4000 U.S. specific alignment program
- Beissbarth deluxe "Operator Assist" alignment program
- Digital adjustment graphics
- EZ-SHIM integrated shim program
- Operator calibration program
- U.S. domestic and import passenger and light
- truck target data (34 years)
- Beissbarth "Quali-Check" calibration monitoring software


Standard Accessories:

- Calibration fixture
- Precision mechanical turntables (2)
- Spoiler adapters-2.16" long (2)
- Universal no-mar quick-clamps for rims 10" through 20" in diameter (4)
- Brake pedal depressor Steering wheel holder
- 4WD extended hub adaptors, nylon slip-on (6)
- Convex wheel adaptors, nylon slip-on
- Recharge backup cable set
- Infra-red remote pickup
- Dust cover
- Operators manual


Optional Accessories:

- Mercedes-Benz specific no-run out wheel clamps
- BMW specific no-run out wheel clamps
- Porsche specific no-run out wheel clamps
- Economy four-point wheel clamps
- Precision electronic turntables with stainless steel surfaces
- Toe-spreader bar
- Storage trolley for weight bags, clamps, etc.
- Weight bags - 5, 8, 10, and 20 kg sizes
- LCD cordless remote display


Technical Specifications:


Angles Measured:

- Total toe, front (F) and rear (R)
- Individual toe, F and R
- Camber, F and R
- Caster, F and R (where applicable)
- Wheel setback
- Thrust angle (Geometric Drive Axis)
- Kingpin inclination (Steering axis inclination)
- Toe-out on turns
- Total steering lock
- Rear axle offset
- Wheel axle offset at rear axle
- Track width difference
- Lateral offset per rear wheel
- Wheel base difference


Other:

- Turntable capacity - 2,200 lbs. each
- Dimensions: 67"H x 24.5"W x 30"D
- Color: Lower cabinet - Blue; Upper cabinet dark gray-
- Electrical: 110V, 1ph, 60hz


Order now!